The Dewalt DW960K-2 is a cordless right angle drill powered by an 18 volt NI Cad battery. The Nickel cadmium batteries provide great power and are a fast recharge however they lack the "charge anytime" capability of the Lithium Ion battery packs. To extend the life of a NI Cad battery it should be fully discharged before recharging.
This isn't a drill that you are going to use every day but if you are a construction professional this is a tool that when needed is practically essential. If you are drilling a 4 inch hole in timbers you will need your hole hawg but there are places where a hole hawg just wont go and you don't want you or your help to be struggling and wasting precious time trying to fit a drill into a place where it was never intended or designed to go.This neat drill is designed to fit into tight spaces while providing power and performance.
Cordless Dewalt
This tool comes with a 3/8 inch chuck as standard, however I would recommend that you replace it with a 1/2inch chuck. Dewalt should take note and supply this drill with a 1/2 inch chuck as standard. A tip for shopping this drill is that it comes form most online outlets with two batteries as standard while in most stores it only comes with one battery. So when doing price comparisons remember to check for the batteries. The 2 in the serial signifies 2 batteries.
The Dewalt DW960K-2 cordless is just as capable of drilling 3 inch holes in joisting as 3/4 inch holes for water pipe under a sink in a kitchen cabinet. It is so easy to handle weighing in at less than 10 pounds and grinding out 300 inch/pounds of torque in low speed mode with a handy variable speed trigger and available reverse mode.
The battery pack is interchangeable with all other Dewalt 18 vole Ni Cad powered tools.
Technical Data
Two speed, variable speed trigger, reversing switch, 18 volt Ni Cad powered (1 hour recharge) Low speed 0 to 500 RPM-Torque 310 inch/pounds High speed 0 to 1,500 PRM- Torque 80 inch/pounds Multi grip trigger renders extreme terrific control in awkward locations 3/8-inch upgradable to ½ inch chuck 2x 18 volt Ni Cad batteries, 1 Hour charger and various bits come in kit. Comes complete with heavy duty plastic carrying case.
Special Price!!! DEWALT DC618K XRP 18-Volt Cordless 1-1/4 Inch - 2-1/2 Inch 16 Gauge 20 Degree Angled Finish Nailer Kit
Click for larger image and other views
DEWALT DC618K XRP 18-Volt Cordless 1-1/4 Inch - 2-1/2 Inch 16 Gauge 20 Degree Angled Finish Nailer Kit Feature
- Engine design allows the tool to work as fast as the end user with consistent nail penetration into both soft and hard joints
- Sequential operating mode allows for precision placement and the bump operating mode provides the user with production speed.
- Easy access to the nosepiece for the removal of jammed nails without the use of screwdrivers or tool wrenches
- Contact Trip Lock-Off allows trigger to be disabled when not in use
- Integrated LED lights for long life and durability; Top cap is impact resistant and easy to remove for troubleshooting
DEWALT DC618K XRP 18-Volt Cordless 1-1/4 Inch - 2-1/2 Inch 16 Gauge 20 Degree Angled Finish Nailer Kit Overview
Harness the power and efficiency of pneumatic nailing with the DeWalt DC618K Heavy-Duty 16 Gauge 20-Degree Angled Finish Nailer Kit. Designed to work with DeWalt's extended run XRP 18-volt batteries, this nailer provides fast, consistent nail penetration in both soft and hard materials. You can select sequential operating mode to ensure precision placement of each nail or a bump operating mode that allows you to harness top speed. A unique engine design allows this tool to work as fast as you do, firing up to four or five nails a second for increased productivity. And at just 8.5 pounds, this tool is lightweight for easy maneuvering and reduced operator fatigue.Whatever you're working on, you'll appreciate the little details that separate this intuitively designed tool from similar nailers. Integrated LED lights make it easy to ensure accuracy. An easy-to-operate contract trip lock-off disables the trigger when the tool is not in use for improved safety. The nosepiece is easy to access and clear tool-free if a nail jam occurs. And a six-position dial makes it simple to move between several applications without stopping to re-acquire exact depth settings, saving you time. Additionally, the 20-degree angled, rear-load magazine is easy to handle for quick refills, and it will accept up to 120 DeWalt or Pas lode 20-degree nails. Included in this kit is a one-hour charger, an 18-volt XRP battery, a reversible belt hook that accommodates right- and left-handed workers, a no-mar tip, safety glasses, and a kit box for easy storage.
SAVE NOW on the special offers below!
Available In Stock. |
| This DEWALT DC618K XRP 18-Volt Cordless 1-1/4 Inch - 2-1/2 Inch 16 Gauge 20 Degree Angled Finish Nailer Kit ships for FREE with Super Saver Shipping. |
Price : Click to Check Update Prices Please. |
